06.130.0204: Floor Tile - Over CBU & Cork on Concrete This detail shows tile laid on cementitious backer unit (CBU) w/ taped joints on a concrete subfloor, with cork underlayment separating the tile assembly from the concrete for soundproofing. The tile is adhered to the CBU using a dry-set or latex-modified portland cement mortar bond [...]
06.130.0203: Floor Tile - Thinset on Concrete This detail shows tile adhered to a concrete subfloor using a dry-set or latex-modified portland cement mortar bond coat. This detail is based on TCNA Method F113. DOWNLOAD DETAILDynamic 3D Detail Explore this detail and download the Sketchup Model in the 3D Warehouse. Explore Detail
06.130.0202: Floor Tile - Thinset on Concrete or Cured Mortar Bed This detail shows tile laid on a concrete slab or a cured mortar bed. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat. If required, an antifracture / waterproof membrane is applied over the cured mortar bed or concrete. [...]
06.130.0101: Floor Tile - Over CBU on Wood Subfloor This detail shows tile laid on cementitious backer unit (CBU) w/ taped joints on a wood subfloor. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat. The wood subfloor has 1/8" gap between the exterior glue tongue & groove plywood sheets, [...]
06.130.1302: Floor Tile Expansion Joint - Over Concrete Control Joint This detail shows a tile expansion joint in floor system made up of tile adhered to a concrete subfloor using a dry-set or latex-modified portland cement mortar bond coat. A 1/4" wide saw cut is made at the existing crack in the concrete to form [...]
06.130.1301: Floor Tile Expansion Joint This detail shows a tile expansion joint in floor system made up of tile laid in a mortar bed, adhered to the cured mortar bed using a dry-set or latex-modified portland cement mortar bond coat. The mortar bed is reinforced with 2" x 2" wire mesh, and an antifracture or [...]
06.130.1300: Wall And Floor Tile - Thinset, Corner Condition This detail shows tile floor and walls laid using a thin-set method. The tile is adhered to the substrate using a dry-set or latex-modified portland cement mortar bond coat. Expansion joints are provided at every change in plane, i.e. wall-to-wall and wall-to-floor. This detail is based [...]
06.130.0103: Floor Tile - Tile on mortar bed over plywood This detail illustrates tile laid on a cured reinforced mortar bed over plywood, with a cleavage membrane separating the tile assembly from the substrate. Waterproof or crack isolation membranes are optional, per design. This detail is based on TCNA Method F145. DOWNLOAD DETAIL
06.130.0201: Floor Tile - Cement Mortar Bed on Concrete This detail shows tile laid in a mortar bed on concrete. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat (optional). The sand and cement mortar bed is reinforced with a 2" x 2" wire mesh. If required, a waterproof / [...]
06.070.0104: Wall Tile - Thinset On Concrete Masonry This detail shows tile over concrete masonry (CMU) laid in the thin-set method. The CMU has flush joints. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat. This detail is based on TCNA Method W202. DOWNLOAD DETAILDynamic 3D Detail Explore this detail [...]