06.130.0103: Floor Tile - Tile on mortar bed over plywood This detail illustrates tile laid on a cured reinforced mortar bed over plywood, with a cleavage membrane separating the tile assembly from the substrate. Waterproof or crack isolation membranes are optional, per design. This detail is based on TCNA Method F145. DOWNLOAD DETAIL
06.130.0201: Floor Tile - Cement Mortar Bed on Concrete This detail shows tile laid in a mortar bed on concrete. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat (optional). The sand and cement mortar bed is reinforced with a 2" x 2" wire mesh. If required, a waterproof / [...]
06.070.0104: Wall Tile - Thinset On Concrete Masonry This detail shows tile over concrete masonry (CMU) laid in the thin-set method. The CMU has flush joints. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat. This detail is based on TCNA Method W202. DOWNLOAD DETAILDynamic 3D Detail Explore this detail [...]
06.070.0103: Wall Tile - Cement Mortar This detail shows tile over concrete laid in cement mortar. There is a waterproof membrane over the backing (if required), metal lath embedded in a scratch coat; then a sand and cement mortar bed, with the tile adhered to a dry-set or latex-modified portland cement mortar bond coat. This [...]
06.070.0102: Wall Tile - One Coat Method, Non-Wet Area This detail shows tile over concrete masonry (CMU) laid in the one-coat method in a non-wet area. There is metal lath embedded in a bed of mortar, with the tile adhered to a dry-set or latex-modified portland cement mortar bond coat. This detail is based on [...]
06.070.0101: Wall Tile - One Coat Method, Wet Area This detail shows tile over concrete masonry (CMU) laid in the one-coat method in a wet area. There is a waterproof membrane over the CMU, metal lath embedded in a bed of mortar, with the tile adhered to a dry-set or latex-modified portland cement mortar bond [...]
06.130.0103: Floor Tile - Tile on mortar bed over plywood This detail illustrates tile laid on a cured reinforced mortar bed over plywood, with a cleavage membrane separating the tile assembly from the substrate. Waterproof or crack isolation membranes are optional, per design. This detail is based on TCNA Method F145. DOWNLOAD DETAIL 
06.130.0201: Floor Tile - Cement Mortar Bed on Concrete This detail shows tile laid in a mortar bed on concrete. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat (optional). The sand and cement mortar bed is reinforced with a 2" x 2" wire mesh. If required, a waterproof / [...] 
06.070.0104: Wall Tile - Thinset On Concrete Masonry This detail shows tile over concrete masonry (CMU) laid in the thin-set method. The CMU has flush joints. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat. This detail is based on TCNA Method W202. DOWNLOAD DETAILDynamic 3D Detail Explore this detail [...] 
06.070.0103: Wall Tile - Cement Mortar This detail shows tile over concrete laid in cement mortar. There is a waterproof membrane over the backing (if required), metal lath embedded in a scratch coat; then a sand and cement mortar bed, with the tile adhered to a dry-set or latex-modified portland cement mortar bond coat. This [...] 
06.070.0102: Wall Tile - One Coat Method, Non-Wet Area This detail shows tile over concrete masonry (CMU) laid in the one-coat method in a non-wet area. There is metal lath embedded in a bed of mortar, with the tile adhered to a dry-set or latex-modified portland cement mortar bond coat. This detail is based on [...] 
06.070.0101: Wall Tile - One Coat Method, Wet Area This detail shows tile over concrete masonry (CMU) laid in the one-coat method in a wet area. There is a waterproof membrane over the CMU, metal lath embedded in a bed of mortar, with the tile adhered to a dry-set or latex-modified portland cement mortar bond [...]