06.130.0501: Base / cove alternatives This set of diagrams show alterative options to handle the transition of a tile assembly between wall and floor, illustrating a flush cove base, lipped cove base, and simple square base condition. When using a coved base, the horizontal leg of the cove should reside flush or slightly above the [...]
06.130.0103: Tile Floor, Tile on mortar bed over plywood This detail illustrates tile laid on a cured reinforced mortar bed over plywood, with a cleavage membrane separating the tile assembly from the substrate. Waterproof or crack isolation membranes are optional, per design. This detail is based on TCNA Method F145. DOWNLOAD Detail
03.080.0221: Wall System - Adhered Stone Veneer Over Steel Studs Backup, Rigid Insulation, Drainage Material This wall system shows adhered stone veneer on glass mat reinforced gypsum board sheathing on a steel stud backup. The sheathing has a fluid-applied air barrier. Fiberglass insulation resides in the stud cavity, and a full-height drainage mat is outside [...]
03.080.0211: Wall System - Adhered Stone Veneer Over Steel Studs Backup, Rigid Insulation, Drainage Material This wall system shows adhered stone veneer on glass mat reinforced gypsum board sheathing on a steel stud backup. The sheathing has a fluid-applied air barrier. Continuous rigid insulation resides outboard of the sheathing, and a full-height drainage mat is [...]