06.110.0415: Tile Shower Assembly

06.110.0415: Tile Shower Assembly This detail shows a tiled shower assembly based on TCNA method B415. It illustrates metal stud backing, cement backer board keyed into the mortar bed at the base and fastened to the studs beginning 3 inches above top of finished curb, minimum. It shows a floated curb pitched 1/4" toward the shower, [...]

06.410.1312: Expansion Joint, Tile on mortar bed

06.410.1312: Expansion Joint, Tile on mortar bed This detail illustrates an expansion joint in a tile floor laid on a cured reinforced mortar bed over a concrete or wood substrate, with a cleavage membrane separating the tile assembly from the substrate.  The expansion joint is installed through the tile and through the mortar bed, all [...]

06.130.0104: Tile to Carpet Transition

06.130.0104: Tile to Carpet Transition This detail shows ceramic tile floor set on a cured mortar bed, and an adjacent floor finish of carpet, with a modular ramp threshold assembly at the transition between the two finishes. DOWNLOAD DETAIL

06.410.0111: The Bonding Patterns

06.410.0111: The Bonding Patterns This diagram shows sample bonding patterns for large format tile.  In each diagram, the larger tiles represent tiles larger than 15 inches on one side.  Designers should use caution when using tiles larger than 15 inches on one side and offset bonding greater than 33%, as excessive offsets may result in [...]

06.130.0501: Base / cove alternatives

06.130.0501: Base / cove alternatives This set of diagrams show alterative options to handle the transition of a tile assembly between wall and floor, illustrating a flush cove base, lipped cove base, and simple square base condition.  When using a coved base, the horizontal leg of the cove should reside flush or slightly above the [...]

06.130.0103: Tile Floor, Tile on mortar bed over plywood

06.130.0103: Tile Floor, Tile on mortar bed over plywood This detail illustrates tile laid on a cured reinforced mortar bed over plywood, with a cleavage membrane separating the tile assembly from the substrate.  Waterproof or crack isolation membranes are optional, per design.  This detail is based on TCNA Method F145. DOWNLOAD Detail

06.130.0204: Floor Tile – Over CBU & Cork on Concrete

06.130.0204: Floor Tile - Over CBU & Cork on Concrete This detail shows tile laid on cementitious backer unit (CBU) w/ taped joints on a concrete subfloor, with cork underlayment separating the tile assembly from the concrete for soundproofing. The tile is adhered to the CBU using a dry-set or latex-modified portland cement mortar bond [...]

06.130.0203: Floor Tile – Thinset on Concrete

06.130.0203: Floor Tile - Thinset on Concrete This detail shows tile adhered to a concrete subfloor using a dry-set or latex-modified portland cement mortar bond coat. This detail is based on TCNA Method F113. DOWNLOAD DETAILDynamic 3D Detail Explore this detail and download the Sketchup Model in the 3D Warehouse. Explore Detail

This site uses cookies

Small text files that are placed on your machine to help the site provide a better user experience. In general, cookies are used to retain user preferences, store information for things like shopping carts, and provide anonymised tracking data to third party applications like Google Analytics. As a rule, cookies will make your browsing experience better. However, you may prefer to disable cookies on this site and on others. The most effective way to do this is to disable cookies in your browser. We suggest consulting the Help section of your browser or if you decline you will be redirected to the About Cookies website which offers guidance for all modern browsers.