02.010.0801: Masonry Wall Cap – Single Wythe CMU
02.010.0801: Masonry Wall Cap - Single Wythe CMU This detail shows a concrete masonry (CMU) wall, top of wall detail. The wall cap is anchored to the grouted wall with a vertical dowel through the flashing, which is then sealed around the dowel penetration. The flashing is shown as a flexible material for the through-wall [...]06.130.0101: Floor Tile – Over CBU on Wood Subfloor
06.130.0101: Floor Tile - Over CBU on Wood Subfloor This detail shows tile laid on cementitious backer unit (CBU) w/ taped joints on a wood subfloor. The tile is adhered using a dry-set or latex-modified portland cement mortar bond coat. The wood subfloor has 1/8" gap between the exterior glue tongue & groove plywood sheets, [...]02.120.0702: Floor Detail – Hybrid Type IIB
02.120.0702: Floor Detail - Hybrid Type IIB This hybrid masonry and steel floor connection detail makes use of bent reinforcement to tie the the floor to the wall. DOWNLOAD DETAILDynamic 3D Detail Explore the detail and download the Sketchup Model in the 3D Warehouse. Explore Detail09.100.0102: Stucco Assembly – Two Coat Stucco Direct to Concrete
09.100.0102: Stucco Assembly - Two Coat Stucco Direct to Concrete DOWNLOAD DETAIL07.130.0102: Epoxy Terrazzo – On Concrete with Moisture
07.130.0102: Epoxy Terrazzo - On Concrete wit Moisture DOWNLOAD DETAIL01.030.0901: Top of Wall Detail – Anchored Brick Veneer, CMU Backing
This detail illustrates a parapet condition including the roof termination into the masonry wall and the top of wall termination. The open web steel joists of the roof structure bear on the CMU wall via a steel bearing plate on a CMU bond beam. The roof system terminates with the roof counterflashing engaging with the […]
01.030.0751: Roof Detail – High Wall – Low Roof
3D Detail
04.130.0206: Stone Floor Adhered to CBU Over Wood Substrate
This detail shows 2 cm (3/4 in.) thick dimension stone adhered to cementitious backer units (CBU) over a wood substrate with a cementitious bond coat. The CBU underlayment is adhered and mechanically fastened to the plywood subfloor. Expansion joints in the floor assembly must be provided at locations shown by the design professional. This detail […]
04.030.0202: Exterior Stone Restraint Anchorage
04.030.0202: Exterior Stone Restraint Anchorage DOWNLOAD DETAIL09.070.0103: Stucco Assembly – Stucco Over CMU with Insulation
This detail shows a three coat Portland cement stucco assembly applied over self-furring lath with two layers of weather resistive barrier (WRB) behind the lath. The structural backup is concrete masonry, with rigid insulation between Z-channel furring. A 1/4″ scratch coat and 1/2″ brown coat make up the base coat, with a finish coat on […]